Motherboard | Specifications |
Form Factor[]
- µATX 22.9 x 19.2 cm Form Factor
CPU Support[]
- Socket MPGA 478B
- Supports Intel P4 FC-PGA2 (0.18 Micron, 256K cache, 400 MHz FSB), 1.4 to 2.4 GHz
- Supports Intel P4 FC-PGA2 (0.13 Micron, 512K cache, 400 MHz FSB), 1.8 to 2.4 GHz
- Supports Intel Celeron P4 FC-PGA2 (0.18 Micron, 128K cache 400 MHz FSB) 1.9 GHz
- 100 MHz (x4 = 400 MHz) data bus support (Quad-Bumped technology)
System Memory[]
- Supports 2 memory slots
- Serial Presence Detect (SPD) support
- Supports a maximum memory size of 1 GB (using 2x512 MB memory modules)
- Support only 3.3V DIMM DRAM configurations
- ECC DIMM support
- 133 MHz SDRAM interface
- STR power management support via self refresh mode using CKE
Core Logic (Chipset)[]
- The Intel 845 chipset consists of the Intel« Memory Controller Hub (MCH) and the Intel« I/O Controller Hub 2 (ICH2).
- Intel« Memory Controller Hub (MCH)
- Processor Host/Bus support (400 MHz data transfer rate)
- Supports SDR-SDRAM at 133 MHz operation (PC133)
- AGTL+ host bus with integrated termination supporting 32-bit host operation
- 1.5 V AGP interface with 4x SBA/data transfer and 2x/4x fast write capability
- 8-bit, 66 MHz 4x hub interface to ICH2
- Intel« I/O Controller Hub 2 (ICH2)
- PCI rev 2.2 specification support
- Supports PCI bus at 33 MHz
- 2 PCI + 1 CNR
- 133 MB/s maximum throughput
- Integrated IDE controller supporting PIO Mode 4 transfers at up to 14 MB/s, Ultra ATA/33 mode transfers at up to 33 MB/s, and Ultra ATA/66 mode transfers up to 66 MB/s and Ultra ATA/100 mode transfers at up to 100 MB/s
- Two USB controllers, supporting wake-up from sleeping states S1-S4, and legacy mouse/keyboard software. Note: There is support for 4 USB ports on the motherboard, all of which are active at the same time (so no need for a USB selection jumper). Two of the USB ports are on the back panel, and the onboard JUSB2 header can be connected to two USB ports.
- AC'97 link for audio and telephony codecs (AC'97 2.1 interface)
- SMBus interface
- PCI rev 2.2 specification support
I/O controller[]
- Winbond W83627HF-AW I/O controller with the following features:
- PS/2 keyboard and mouse controller
- Floppy disk controller supporting one FDD with 360 K, 720 K, 1.2 M and 1.44 MB
- 2 serial ports, both 16C550 Fast UART compatible
- 1 Parallel port supporting SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), and ECP (Extended Capabilities Port) modes
- 1 MIDI/game port
- Hardware monitoring
- Fan speed monitoring
- Built-in case open detection circuit
- Watchdog comparison of all monitored values
Audio Chipset[]
- Integrated on the SigmaTel Technologies STAC9756T - audio codec
- DirectSound AC'97 2.1 audio
- Inputs and outputs: Stereo inputs for line-in, CD audio, mono inputs for microphone and TAD, MPU-401 (UART mode) interface for wavetable synthesisers and MIDI devices; integrated game port.
- Mixer features: Mixer with stereo for line, CD audio, auxiliary, music synthesiser, digital audio (wave files), and mono for microphone and speakerphone
- Features: 3D stereo enhancement for simulated surround, power management support
- SPDIF output for PCM & AC3 sound formats
BIOS Specifications[]
- Plug and Play
- Advanced Configuration and Power Interface (ACPI) 1.0
- Advanced Power Management (APM) 1.2
- Y2K
- PC 2001
- S3 mode
- Desktop Management Interface (DMI)
- 2 Mbits flash device
- Language supported: English
- POST
Compliance[]
Specification | Description |
µATX | µATX form factor specifications |
AGP 1.0 | Accelerated Graphics Port |
APM | Advanced Power Management BIOS interface specification |
ACPI | Advanced Configuration and Power management Interface |
EPP | Enhanced Parallel Port IEEE 1284 standard, mode 1 or 2 |
ECP | Extended Capabilities Port |
ATA-33 ATA-66 ATA-100 |
Synchronous DMA Transfer Protocol specification (to be proposed as Ultra DMA/33 standard) |
PCI 2.2 | PCI Local Bus specification |
Plug and Play | Plug and Play BIOS specification |
USB | Universal Serial Bus specification |
External Link[]
- Source: Packard Bell > Cosmos (GA8IDMNF) Rev 1.0 µATX motherboard